Hybrid Solvent Primer
Multi-Purpose Primer For Porous & Non-Porous Surfaces
EXCELLENT ADHESION & SEALING
Key Benefits
- Superior bonding and penetration performance
- Deep penetration
- Excellent adhesion
- Seals and strengthens surfaces
- Fast drying
- Reduces dusting
- Easy to apply
Description
A high performance hybrid solvent based primer designed to penetrate, seal and strengthen a wide range of surfaces. It enhances adhesion of subsequent coatings and waterproofing systems by providing an excellent bonding bridge.
- Deep penetration and sealing of porous substrates
- Enhances adhesion on both porous and non-porous surfaces
- Reduces surface dusting and friability
- Improves durability and performance of topcoats
- Suitable for use with most waterproofing systems
Formulated with hybrid resins and special solvents for superior performance and broad substrate compatibility. Ideal for use prior to the application of waterproofing membranes, coatings, paints and sealants.
Recommended Uses
- Roofs, parapets, balconies and terraces
- Concrete, cement screeds and masonry
- Fibre cement, plaster and rendered surfaces
- Metal surfaces including galvanised iron, steel and aluminium
- As a bonding primer before waterproofing and coatings
Technical Data
| Viscosity (Ford cup no 4) | 30 sec @ 25°C |
|---|---|
| Relative density | 0.86 kg/L |
| Flash point (closed cup) | 35°C |
| pH | 8.5 |
| Appearance | White liquid |
| Colour | White |
| Specific gravity | 1.16 kg/L |
| Solids content | 20 ± 2% |
| Viscosity (Krebbs Stormer) | 60 KU @ 25°C |
| Drying time (touch dry) | 30 minutes @ 25°C |
| Overcoating time | After 4 hours, 16 hours recommended |
| Alkali resistance | Excellent |
| Resistance to water | Good |
| Flexibility | Good |
| Wet covering power | Approx. 10 m²/L depending on substrate porosity |
| Practical spreading rate | 3–8 m²/L per coat depending on surface porosity |
| Recommended dry film thickness | 45 microns – 2 roller/brush applied coats @ 90 microns wet film thickness each |
Application Instructions
- Ensure surface is clean, dry and free from dust, oil, grease, loose particles and contaminants.
- Stir well before use.
- Apply using roller, brush or airless spray.
- Allow to dry completely before applying waterproofing membrane or topcoat.
- Do not thin. Use as supplied.
Health & Safety
Refer to the Safety Data Section for full health and hazard information. Ensure adequate ventilation during use. Use gloves, goggles and protective clothing.
Storage
- Store in a cool, dry place away from direct sunlight.
- Keep container tightly sealed when not in use.
- Store between 5°C and 30°C.
Cleaning
Clean equipment with water. If not completely clean, QD Thinners should be used.
Packaging
1 L, 5 L and 20 L drums.
Product images are for illustrative purposes only. Actual product packaging, container design and appearance may vary.
Related products
