Top Coat
Pure Acrylic Floor & Roof Coating
DURABLE MID SHEEN FINISH
Key Benefits
- Protection that lasts
- Water resistant
- UV resistant
- Excellent adhesion
- Flexible and durable
- Non-toxic, water based
- For floors and roof surfaces
- Excellent washability
- Hard wearing
- Long lasting
Storage
- Must be stored in a tightly sealed container at room temperature.
- Store away from direct sunlight.
- For optimum results use before expiry date.
- Wetcor Top Coat may still be usable after expiry date, subject to a quality control check before application.
Surface Preparation
Surface should be clean, sound and dry prior to application.
Intended Uses
- Exterior floors
- Galvanised iron
- Tile roofs
Application Details
Apply by roller, brush or spray.
| Touch dry | 45 min |
|---|---|
| Recoat | 4 hours |
| Fully cured | 1 week |
| Practical spreading rate – rough surface | 3 m²/L/coat |
| Practical spreading rate – smooth surface | 8 m²/L/coat |
| Recommended dry film | 75 microns, 2 coats at 110 microns wet film thickness each |
| Flexibility | Excellent (conical mandrel) |
Limitations
- Apply only to clean, dry and properly prepared surfaces.
- Do not apply if rain is imminent.
- Do not apply below 10°C or above 40°C.
Safety Precautions
- Keep out of reach of children.
- Avoid contact with skin and eyes.
- Wear gloves and eye protection during application.
- In case of contact with skin or eyes, rinse immediately with plenty of clean water.
- If irritation persists, seek medical attention.
First Aid
- Ingestion: Drink water, do not induce vomiting and call for medical attention.
- Skin: Wash affected area with soap and water.
- Eyes: Flush with copious volumes of clean water and seek immediate medical attention.
Environment & Disposal
Do not discharge into drains or waterways. Absorb spills with sand and/or rags and dispose of in accordance with local regulations.
Technical Data
| Viscosity | 100–105 Krebs Units at 25°C |
|---|---|
| pH | 8.5–9 |
| Specific gravity | 1.22 kg/L |
| Solid content (mass non volatile) | 40% |
| Solid content (volume non volatile) | 28% |
| Scrub resistance | Passes Grade 1 |
| Accelerated stability (60°C) | Pass |
| Freeze thaw stability | Pass |
| Touch dry | 45 min |
| Recoat | 4 hours |
| Fully cured | 1 week |
| Practical spreading rate – rough surface | 3 m²/L/coat |
| Practical spreading rate – smooth surface | 8 m²/L/coat |
| Recommended dry film | 75 microns (2 coats at 110 microns wet film thickness each) |
| Flexibility | Excellent (conical mandrel) |
Standard Roof Colours
Red Oxide, Terracotta, Charcoal, Dark Brown, Green, Light Grey, Mid Grey and White. Colours are a guideline only. Actual colours may vary slightly.
Product images are for illustrative purposes only. Actual product packaging, container design and appearance may vary.