Nano Repellent

Key Benefits

• Protects against water
• Water repellent
• Deep penetration
• Breathable surface

Product Overview

Advanced nano technology water repellent impregnating treatment / primer.

Hazards / Symptoms, Prevention & First Aid

Fire / Flammable

Prevention: No open flames, no smoking and no sparks. Fire extinguishing media: Foam, Carbon Dioxide or dry powder. Fog may be used to cool and control.

Explosion

Above 35°C an air mixture may be formed. Use ventilation and explosion-protected electrical equipment and connect to earth.

Inhalation

Symptoms may include sore throat, coughing and dizziness. If ventilation is insufficient, use available respiratory protection. Move to fresh air and seek medical attention in severe cases.

Skin

Repeated contact may degrease the skin and lead to irritation. Use barrier cream and impervious gloves. Wash with hand cleaner or soap and water and remove contaminated clothing. Seek medical attention if discomfort persists.

Eyes

Redness and pain may occur. Use face shields or goggles and avoid direct contact. Rinse immediately with plenty of water and seek medical advice.

Ingestion

Observe hygiene rules and wash hands before eating, drinking or smoking. Wash mouth with water, give plenty of water, do not induce vomiting and seek medical advice.

Spillage

Keep out of sewers. Maintain high housekeeping standards. Absorb in sand or inert absorbent.

Disposal

Dispose as required by local authorities.

Storage

• Store in a cool place and prevent contact with any source of ignition.
• Keep separate from oxidisers.

Technical Data

S.G.	0.80 kg/L
Viscosity	< 20 seconds Ford Cup no 4 @ 25°C
Coverage	Depends on porosity of the building material. Average: 5 m²/L
Drying	± 2 hours @ 25°C. Depends on volume used. Once the wetness disappears another coat may be applied.
Recommended uses	Plaster, brick, aerated concrete, fibre cement and paint. 2 coat treatment is normally recommended.

Application Method

• Cleaning: Clean equipment with Turps.
• Surface prep: Clean the surface and apply Nano Repellent when surface is dry.
• Application: Low pressure spray or flooding.

Product images are for illustrative purposes only. Actual product packaging, container design and appearance may vary.