Etch Primer

Key Benefits

• Rust inhibiting
• Excellent adhesion
• Heat resistant to 200°C
• Fast drying
• Solvent resistant
• Black suede finish

Storage

• Store tightly closed in a cool, well-ventilated place.
• Keep away from heat, sparks, open flames and oxidisers.

Surface Preparation

• Wire-brush or mechanically clean where necessary.
• Remove rust, scale, oil, grease and contamination.
• Degrease and treat steel with an appropriate cleaner.
• Surface must be clean, sound and dry.

Intended Uses

• Primer coat for steel and ferrous metal surfaces.
• Provides an excellent base for top coats.

Application Details

• Apply by roller, brush or spray.
• Practical spreading rate: 10 m²/L per coat.
• Apply 2 coats unthinned.
• Recommended total dry film: 30 microns.
• Clean equipment with Etch Thinners.

Limitations

• For exterior exposure, apply a suitable final coat within six months.
• Use only with adequate ventilation.
• Keep away from ignition sources.

Safety Precautions

• Flammable. No smoking, sparks or open flames.
• Vapour-air mixtures may form above 12°C.
• Use explosion-protected equipment and earth containers.
• Wear impervious gloves and goggles.
• Use respiratory protection if ventilation is insufficient.

First Aid

• Inhalation: Move to fresh air.
• Eyes: Rinse immediately with plenty of water.
• Skin: Wash with soap and water and remove contaminated clothing.
• Ingestion: Rinse mouth, give water, do not induce vomiting and seek medical advice.

Environment & Disposal

• Keep out of sewers and waterways.
• Absorb spills with sand or inert absorbent.
• Dispose in accordance with local requirements.

Technical Data

Fineness of grind	<20 microns
Consistency at 23°C	20–25 sec Ford Cup No. 4
Specific gravity	0.95 kg/L
Surface dry	8 minutes at 25°C
Hard dry	12 hours at 25°C
Solvent resistance	Very good
Heat resistance to 200°C	Excellent — Tested
Practical spreading rate	10 m²/L/coat
Recommended dry film	30 microns, 2 coats unthinned

Product images are for illustrative purposes only. Actual product packaging, container design and appearance may vary.